Ba duk kayan aikin ƙofa suke jin iri ɗaya ba. Makullin ƙofa yana jan hankali, amma makullin yana tsara ƙwarewar yau da kullun. Makullin rufewa mai laushi yana kawo shiru; makullin da aka saba amfani da su suna ba da araha.YALIS yana ba da duka biyun - tare da cikakken jagorar shigarwa.
Kashi na 1: Rufewa Mai Laushi da Hinges na Daidaitacce
| Fasali | Na'urar Hinge ta Daidaitacce | Hinge Mai Rufewa Mai Laushi |
| Tsarin aiki | Juyawa mai sauƙi | Ginannen damper na hydraulic |
| Sautin rufewa | Dannawa mai ƙarfi | Tasha mai laushi da shiru |
| Haɗarin matse yatsa | Babban | Ƙasa |
| Daidaitawa | Babu | Ana iya daidaita shi da 3D (samfura da yawa) |
| Tsawon rai | Shekaru 5-8 | Shekaru 10+ (inganci) |
| Kudin kowace hinjis | Dala 1-4 | $6-20+ |
Yadda suke aiki:Madaidaitan madauri suna rufewa. Madaukai masu laushi suna rage gudu ta atomatik kusa da rufewa - babu buƙatar ƙarin ƙarfi.
Kashi na 2: Gidaje Masu Kyau da Hayar Gida - Wanne Za a Zaɓa?
| Yanayi | Hinjin da aka ba da shawarar | Me yasa |
| Gida mai tsada, mai shi ne | Rufewa mai laushi + ɓoye + 3D mai daidaitawa | Shiru, aminci (babu yatsan da aka matse), jin daɗi na musamman |
| Gidan haya / gidan tattalin arziki | Hinji na yau da kullun ko rufewa mai laushi | Ƙarancin farashi a gaba, sauƙin sauyawa |
| Hayar Airbnb / matsakaicin lokaci | Rufewa mai laushi na matakin shiga | Rage koke-koken hayaniya, inganta ƙwarewar baƙi |
Shawarar YALIS:
Alatu: Hinji mai laushi mai ɓoyewa mai 3D (bakin ƙarfe 304, kaya mai nauyin kilogiram 50, zagayowar 200k)
Hayar:Hinji mai nauyi ko hinji mai ƙarancin kuɗi
Kashi na 3: Cikakken Shigar da Hannun Ƙofa (Matakai 10)
Shigar da makullin ƙofa yadda ya kamata yana tabbatar da tsaro da aiki cikin sauƙi. Makullin YALIS sun haɗa da littattafan zane da bidiyon QR.
Kayan aiki: Sukuri, ma'aunin tef, fensir, rawar soja (sakar ramin 54mm), ciza.
| Mataki | Aiki | Maɓallin Maɓalli |
| 1 | Ƙayyade mikawa (hagu/dama) | Hannun YALIS suna da maɓuɓɓugan ruwa masu juyawa - babu rabuwa |
| 2 | Shigar da makulli a gefen ƙofa | Firam ɗin rufewa na fuska, kunsasshen ruwa |
| 3 | Shigar da silinda daga waje | Maɓallin maɓalli a waje, an ɗaure shi da sukurori da aka saita |
| 4 | Saka sandar ta cikin maƙallin | Gyara idan ya fi kauri fiye da ƙofar +5mm |
| 5 | Haɗa lever na waje + rosette | Zamewa a kan sandar, danna ruwa |
| 6 | Haɗa lever na ciki + rosette | Daidaita a kwance tare da lefa na waje |
| 7 | An tsare shi da dogayen sukurori masu hawa | Matsewa ta hanyar amfani da rosette na ciki |
| 8 | Tsarin gwaji | Lever yana janye makullin; maɓalli yana faɗaɗa maƙullin ƙarewa |
| 9 | Shigar da farantin yajin aiki a kan firam ɗin | Alamar makullin makulli, wurin da aka yi wa kurfi, makullin makulli, makullin makulli |
| 10 | Daidaitawa ta ƙarshe | Ƙofar rufewa - babu shigarwar mannewa mai santsi, mai mannewa |
Gyaran gaggawa:Maƙallin ba zai yi fure ba? Maƙallin ya yi tsayi sosai. Maƙallin ba ya ja da baya? Maƙallin ba a saka shi gaba ɗaya ba. Yi amfani da foda graphite don jujjuya maɓalli mai ƙarfi (kada a taɓa mai).
Me yasa YALIS yake da alaƙa da hinges da hannaye?
Hinges:Jerin yau da kullun (tattalin arziki) + jerin ɓoye na 3D mai laushi (alatu)
Hannun hannu:Zinc alloy, bakin karfe, PVD gamawa - mai dacewa da kulle mai wayo
Darajar:Samfura na shigarwa, jagororin bidiyo na QR, ƙarfin damping na musamman na OEM
Tambayoyin da Ake Yawan Yi (FAQ)
T1: Shin hinges masu laushi suna rasa damshi akan lokaci?
Man hinges masu inganci (YALIS) suna amfani da man da aka shigo da shi daga ƙasashen waje - an gwada su har zuwa zagaye 100,000. Sanyi na iya rage rage danshi na ɗan lokaci, amma aikin yau da kullun yana dawowa.
Q2: Shin ya kamata in yi amfani da maƙallan rufewa mai laushi a cikin haya?
Ba dole ba ne, amma masu rage hayaniya suna rage koke-koken hayaniya kuma suna inganta riƙe haya - kyakkyawan ROI.
Q3: Ta yaya zan san tsawon sandar da ta dace?
Sandan ya kamata ya fito daga kowane gefe daga 5-8mm. Ya yi tsayi sosai → babu maɓuɓɓugar ruwa. Ya yi gajere sosai → ba zai ja maƙulli ba.
T4: Zan iya ƙara damper a kan madaurin da ke akwai?
A'a. Sauya dukkan abin ɗaurewa. Yi shawara kafin shigarwa.
T5: Shin YALIS tana ba da kayan haɗin hinge da handle?
Eh. Kunshin kayan aikin ƙofa cikakke - salo ɗaya da kuma tanadin kuɗi.
T6: Zan iya shigar da makullin ƙofa ba tare da ramukan da aka riga aka haƙa ba?
Za ku buƙaci injin haƙa rami da kuma injin yanke rami mai girman milimita 54. YALIS ya haɗa da samfurin shigarwa.
Zaɓi kayan aikin ƙofa na YALIS - shiru don jin daɗi, farashi don haya, da sauƙin shigarwa ga kowa.
Ziyarci www.yalisdesign.comdon kundin adireshi da bidiyo.
Lokacin Saƙo: Mayu-11-2026