Ba duk kayan aikin ƙofa bane suke da sauƙin gafartawa. Makullin ƙofa yana samun kulawa sosai, amma makullin yana ƙayyade ko ƙofa ta kasance a layi tsawon shekaru. Wannan jagorar tana kwatanta makullin 3D masu daidaitawa da makullin da aka gyara akan haƙurin shigarwa da sauƙin kulawa.YALIS yana kawo muku zaɓuɓɓuka biyu.
Kashi na 1: Menene Su?
hinge mai gyara- ƙirar ganye biyu ta gargajiya, babu daidaitawa bayan shigarwa.
3D mai daidaitawa- yana ba da damar daidaitawa ta micro a tsaye (sama/ƙasa), kwance (hagu/dama), da kuma matsi (shiga/fita).
Sashe na 2: Juriyar Shigarwa
| Fasali | Hinji mai gyarawa | Hinji Mai Daidaita 3D |
| Ana buƙatar daidaito | Mai girma sosai (±1mm) | Sassauci (±3-5mm) |
| Juriyar karkacewar firam/ƙofa | Ƙasa | Babban |
| Gyara kuskuren hanyar sadarwa | Sake hanyar ko jirgin ƙasa | Sukuran daidaitawa na juyawa |
| Lokacin shigarwa | Ya fi tsayi | Gajere - shigar da sauri sannan gyara |
| Mafi kyau ga | Sabbin firam ɗin daidai | Tsoffin ƙofofi, firam ɗin da ba na yau da kullun ba, DIY |
Muhimman abubuwan da za a yi la'akari da su:Wahalar shigarwar hinges na 3D - ya dace da masu gyaran gashi da ayyukan gyara.
Kashi na 3: Sauƙin Kulawa
| Fasali | Hinji mai gyarawa | Hinji Mai Daidaita 3D |
| Gyara ƙofar da ke lanƙwasa | Ba zai yiwu ba (ƙara shims ko sake yin rehang) | Minti tare da maɓallin hex |
| Motsin katako na yanayi | Babu diyya | Daidaita micro-da sauri |
| Sakawa akan lokaci | Yana da wahalar matsewa | Sake matsewa ta hanyar sukurori |
| Kayan aikin da ake buƙata | Cisel, shims, rawar soja | Maɓallin Hex ko sukudireba |
| Mita na kulawa | Gyara mai mahimmanci idan matsala ta bayyana | Dubawa da gyara na shekara-shekara |
Misali:Kofa mai nauyi ta katako tana yin faɗuwa 2mm bayan shekara guda. Ana buƙatar cire ƙofa da kuma shimfida matakala. Hinjini mai siffar 3D - juya sukurori, an gama.
Kashi na 4: Sauran Kwatancen
| Bangare | Hinji mai gyarawa | Hinji Mai Daidaita 3D |
| Loda a kowace hinjis | 30-50 kg | 40-80 kg |
| Rayuwar zagayowar | 100-200k | 100-200k (raka'o'in inganci) |
| Bayyanar | fil ɗin da ake iya gani | Ana iya ɓoye shi gaba ɗaya |
| Kudin kowace naúrar | $2-8 | $8-25+ |
| Shahara | Yaɗuwa | Girma cikin sauri |
Kashi na 5: Yaushe Za a Zaɓi Wanne?
Zaɓi maƙallin da aka gyara idan:
Kasafin kuɗi mai tsauri sosai
Ƙofa da firam ɗin da suka dace da masana'anta tare da babban daidaito
Mai sakawa mai ƙwarewa
Ƙofar da ba ta da amfani ko ta wucin gadi
Zaɓi hinge mai daidaitawa na 3D idan:
Ƙofofin cikin gida (mai yiwuwa nan gaba su faɗi)
Sauya tsohon firam ɗin ƙofa (ba daidai ba girma)
Gyaran otal/gida mai yawa (rage daidaitawa a wurin aiki)
Kofofin katako masu nauyi ko gilashi (sun fi saurin yin lanƙwasa)
Tsarin ƙaramin tsari (ɓoyayyen hinges na 3D yana kiyaye gefen ƙofa tsabta)
Abokan ciniki na DIY / e-commerce (babban haƙuri ga kuskure)
Me yasa ake amfani da hinges na YALIS 3D masu daidaitawa?
Daidaita axis 3 - tsaye ±2mm, gefe ±2mm, matsin lamba ±1.5mm
304 bakin karfe - An tabbatar da takardar shaidar EN1935
Nauyin kilogiram 50 a kowace hinjis - an gwada zagaye 200,000
An ɓoye shi gaba ɗaya - kyakkyawan tsari don ƙofofin zamani
Haka kuma akwai:hinges masu ƙarfi don shiga da ƙofofin wuta
YALIS tana ba da keɓancewa na OEM - kewayon daidaitawa, ƙarewa, da ƙarfin kaya.
Tambayoyin da Ake Yawan Yi (FAQ)
T1: Waɗanne hanyoyi ne hinges mai daidaitawa na 3D zai iya motsawa?
Sama/ƙasa (tsaye), hagu/dama (gefen gefe), da kuma shiga/fita (matsi). Daidaiton kewayon ya bambanta dangane da samfurin.
T2: Kofar da aka gyara min tana lanƙwasa. Zan iya gyara ta?
Eh, amma yana buƙatar aiki mai yawa: ƙara shims a ƙarƙashin hinge na ƙasa ko cire su a sake rataye su. Tsananin lanƙwasawa na iya buƙatar shimfida ƙofar.
T3: Shin hinges na 3D sun fi rauni fiye da waɗanda aka gyara?
A'a. Ana ƙarfafa ingantattun hinges na 3D (kamar YALIS) - galibi suna da ƙarfi fiye da hinges na asali.
T4: Zan iya shigar da hinjis na 3D da kaina?
Eh. Haƙurinsu mai yawa yana sa su zama masu sauƙin yi da kanka. Yi amfani da samfuri don samun sakamako mafi kyau.
T5: Shin hinges na 3D suna buƙatar kulawa akai-akai?
A duba daidaiton kowace shekara. Yi amfani da maɓalli mai siffar hex don gyarawa idan ana buƙata. A shafa man shafawa kaɗan don hana tsatsa.
T6: Shin YALIS tana bayar da samfura?
Eh. Tuntuɓi ƙungiyarmu don samun samfura, takardun bayanai, da farashin da ya dace.
T7: Wane kauri ƙofa ne ke aiki da ɓoyayyun hinges na 3D?
Yawanci 35-50 mm. Nau'ikan da aka yi wa nauyi sun dace da ƙofofin katako masu ƙarfi na mm 50-70.
Haɓaka kayan aikin ƙofar ku da madaurin 3D mai daidaitawa na YALIS - shigar sau ɗaya, daidaita har abada.
Ziyarciwww.yalisdesign.com don cikakken tarin hinge.
Lokacin Saƙo: Mayu-19-2026